UltraTNT™ PSA Tape
UltraTNT™ PSA Tape
UltraTNT™ PSA Tape is a waterproof seam & repair tape with Ultra™ fiber. Constructed with two layers of 0.25 mil polyester film with light grey Ultra™ yarn inserted in the warp and bias. The backing is a pressure sensitive, high tack, non-yellowing adhesive.
Designed to be applied to the film side of fabrics to reinforce and waterproof seams. The tape is very stretch-resistant along the length of the roll, where there are straight, parallel Ultra™ yarns inserted to control stretch. The Ultra CrossPly™ yarn helps control bias stretch and adds to the tear-resistance of the tape.
UltraTNT™ PSA Tape has an excellent bond to the film side of Ultra™ and EPLX™ fabrics. We recommend this process to create the best bond:
Work in a room temperature of at least 70° F.
Fabric should be clean and dry; if not, clean fabric surface with rubbing alcohol.
Peel back release paper and apply tape evenly over seam, a few inches at a time.
Go back over the tape, applying even pressure with rubber seam roller (or by hand, if no roller available).
Let cure for 24 hours for best adhesion.
Available in five widths:
⅝”, 1¼”, 2”, 3”, 4”
⅝” is designed for reinforcing UltraTNT tent fabric.
1¼” is the minimum recommended width for waterproof seams.
